تاکسنومی استراتژی‌های انتخاب تأمین‌کننده و عملکرد کسب و کار آنها (مورد مطالعه: شرکتهای کاشی و سرامیک)

نوع مقاله: مقاله پژوهشی

نویسندگان

1 دانشجوی دکتری دانشگاه فردوسی مشهد

2 عضو هیات علمی دانشگاه فردوسی مشهد

چکیده

هدف تحقیق حاضر شناسایی خوشه ها، ابعاد و مؤلفه‌های انتخاب تأمین‌کننده برای شرکت‌های کاشی و سرامیک در ایران می‌باشد. به این منظور معیارهای انتخاب تأمین‌کننده که بیشترین فراوانی را در بین معیارهای مطرح شده در مطالعات گذشته را داشته‌اند، مبنای تعریف ابعاد مورد نظر قرار گرفتند. در این تحقیق، 86 شرکت کاشی و سرامیک در ایران انتخاب گردیدند و ابتدا با استفاده از تحلیل خوشه‌ای به خوشه‌بندی شرکت‌های مزبور پرداخته شد و سپس با استفاده از تحلیل تشخیصی ترکیب خطی مناسب از این ابعاد تعیین گردید. نتایج نشان داد که شرکت-های کاشی و سرامیک در ایران را می‌توان در سه خوشه از نظر معیارهای انتخاب تأمین‌کننده قرار داد و استراتژی‌های غالب مورد استفاده توسط شرکت‌های کاشی و سرامیک در ایران جهت انتخاب تأمین‌کننده مناسب در یک صفحه روی دو بعد «تکنولوژی- کیفیت» و «هزینه» قابل ارائه می‌باشد. همچنین در این تحقیق عملکرد کسب و کار این شرکت‌ها مورد بررسی قرار گرفت و نتایج نشان داد که سه خوشه استخراج شده از شرکت‌های کاشی، از نظر عملکرد کلی کسب‌و ‌کار تفاوت معنی‌داری با یکدیگر دارند.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

The Taxonomy of supplier selection strategies and their business performance (The case study of ceramic and tile companies)

چکیده [English]

The aim of this study was to identify clusters, the dimensions and components supplier selection for ceramic tile company in Iran. For this purpose, the criteria of supplier selection that have been most frequently among the proposed measures in previous studies, were the basis for defining the desired dimensions. In this study, 86 companies of ceramic tiles in Iran were selected and using the cluster analysis of the companies discussed and then use the appropriate combination of the diagnostic analysis of samples were measured. The results showed companies in the ceramic tile can be placed in three sets of criteria for supplier selection and used dominant strategies by companies for selecting the right supplier of ceramic tiles are available in a two-dimensional screen "technology - quality" and "cost". The study also examined the firm's business performance and the results showed that three extracted clusters from tile companies, in terms of overall business performance significantly different from each other.

کلیدواژه‌ها [English]

  • supplier selection strategy
  • business performance
  • cluster analysis
  • diagnostic analysis

جعفرنژاد، احمد(1385)؛ مدیریت تولید و عملیات نوین، انتشارات دانشکده مدیریت دانشگاه تهران، چاپ اول، تهران.

سیدحسینی، سید محمد؛ بیات ترک، امیر(1383)؛ ارزیابی عوامل تولید ناب در سازمان های تولیدی غیرپیوسته، فصلنامه علمی- پژوهشی مدرس علوم انسانی- پژوهشهای مدیریت در ایران، دوره 9، ش 2.صص 89-59.

مقبل باعرض، عباس؛ آذر، عادل؛ میرمهدی، سیدمهدی(1393)، بخش بندی بازار حمل و نقل عمومی شهری با استفاده از تحلیل خوشه ای (مطالعه موردی: منطقه شش شهر تهران)، فصلنامه اقتصاد و مدیریت شهری، شماره 7. صص50-35.

منابع لاتین

Aissaoui N, Haouari M, Hassini E.(2004); “Supplier selection and order lot sizing modeling: A review”, Computers & Operations Research, Vol. 34, 2667-2673

Arikan, F. (2013). “A fuzzy solution approach for multi objective supplier selection.” Expert Systems with Applications., Vol. 40, 947–952.

Awwad, A. S. & Bin Talal, A. H. (2008); “The link between competitive priorities and competitive advantage”. Production and Operations Management Society 19th Annual Conference, POMS, La Jolla, California, USA May 9 to May 12, 1-39.

Benzing, C., Chu, H. M. & Callanan, G. (2005); “A Regional Comparison of the Motivation and Problems of Vietnamese Entrepreneurs”. Journal of Developmental Entrepreneurship. 10(1), 3-27.

Browne, J., Dubois, D., Rathmill, K., Sethi, S. & Stecke, K. (1984); “Classificationof flexible manufacturing systems”. FMS Magazine. 1(2), 114-117.

Boer, L., Wegen, L., & Telgen, J. (1998); “Outranking methods in support of supplier selection”. European Journal of Purchasing & Supply Management, 4, 109– 118.

Bolk, H., Hans-ullrich, F. & Haywood, B. (1989); “Implementing flexible manufacturing”. Netherlands: Eburon Publishers.

Boyer, K.K., Lewis, M.W. (2002); “Competitive priorities: investigating the need for supply chain trade-offs in operations strategy”. Journal of Operations Management, Vol. 11, No. 1, 9–20.

Byrd, T. A., Lewis, B. R. & Bryan, R. W. (2006); “The leveraging influence of strategic alignment on IT investment: an empirical examination”. Information & Management. 43, 308-321.

Carter, P. I., Carter, J. R., Monczka, R. M., Slaight, T. H.& Swan, A. J. (2000); “The future of purchasing and supply: a ten-year forecast”. The Journal of Supply Chain Management. 36(1), 14-26.

Cao, Q. & Dowlatshahi, S. (2005); “The impact of alignment between virtual enterprise and information technology on business performance in an agile manufacturing environment”. Journal of Operations Management. 23, 531-550.

Chan, F. T. S., & Kumar, N. (2007); “Global supplier development considering risk factors using fuzzy extended AHP-based approach”. The International Journal of Management Science, 35, 417–431.

Christiansen, T., Berry, W.L., Bruun, P., Ward, P. (2003); “A mapping of competitive priorities, manufacturing practices, and operational performance in groups of Danish manufacturing companies”, International Journal of Operations & Production Management, Vol. 23, No. 10, 1163-1183.

Dargi, A., Anjomshoae, A., Rahimnezhad, M., Memari, A. and Binti, M. (2014); “Supplier Selection: A fuzzy-ANP Approach.” Information Technology and Quantitative Management., Vol. 31, 691-700.

Degraeve, Z., Labro, E. & Roodhooft, F. (2000); “An evaluation of supplier selection methods from a total cost of ownership perspective”. European Journal of Operational Research 125 (1), 34– 58.

Dickson, G. W. (1966); “An analysis of vendor selection systems and decisions”. Journal of Purchasing 2 (1), 5–17.

Dursun, M. and Karsuk, E.E. (2013); “A QFD-based fuzzy MCDM approach for supplier selection.” Applied Mathematical Modelling., Vol. 37, 5864-5875.

Erdibilli, B. and Eko Saputro, T. (2013); “Supplier selection using integrated fuzzy TOPSIS and MCGP: a case study.” Social and Behavioral Sciences., Vol. 116, 3957-3970.

Flynn, B.B., Huo, B., Zhao, X., (2010); ”The impact of supply chain integration on performance: A contingency and configuration approach”, Journal of Operations Management, Vol. 28, No. 1, 58-71.

Ghodsypour, S. H., & O’Brien, C. (1998); “A decision support system for supplier selection using an integrated analytic hierarchy process and linear programming”. International Journal of  Production Economics, 199–212.

Gyan-Baffour, G. (1994); “Advanced manufacturing technology, employee participation and economic performance: an empirical analysis”. Journal of Managerial. Issues 1, 491-505.

Handfield, R. B., Ragatz, G. L., Petersen, K. J. & Monczka, R. M. (1999); “Involving suppliers in new product development”. California Management Review. 42(1), 59-82.

Ho, W., Xu, X. & Dey, P. K. (2010); “Multi-criteria decision making  approaches for supplier evaluation and selection: a literature review”. European Journal of Operational Research 202 (1), 16–24.

Jantan, M., Ndubisi, N. O. & Hing L. C. (2006); “Supplier selection strategy and manufacturing flexibility: impact of quality and technology roadmaps”.Asian Academy of Management Journal. 11)1(, 19-47.

Kayis, B. & Kara, S. (2005); “The supplier and customer contribution to manufacturing flexibility”, Australian manufacturing industry’s perspective. Manufacturing Technology Management. 16(7), 733-752.

Kilincci, O. and Onal, S.A. (2011); “Fuzzy AHP approach for supplier selection in a washing machine company.” Expert Systems with Applications., Vol. 38, No. 8, 9656-9664.

Kim, S. W. (2006); “The effect of supply chain integration on the alignment between corporate competitive capability and supply chain operational capability”. International Journal of Operations & Production Management. 26(10), 1084-1107.

Kroes. J. (2007); “Outsourcing of supply chain processes: evaluating the impact of congruence between outsourcing drivers and competitive priorities on performance”, for the Degree Doctor of Philosophy, Georgia Institute of Technology.

Koh, S.C. L., Demirbag, M., Bayraktar, E., Tatoglu, E., Zaim, S., (2007); ” The impact of supply chain management practices on performance of SMEs”, Industrial Management & Data Systems, Vol. 107, No. 1, 103-124.

Kotabe, M.(2001). "Outsourcing Service Activities". Journal of Marketing Management, 10(1), 40-45.

Koufteros, X.A., Vonderembse, M., Doll, W. (2002); “Examining the competitive capabilities of manufacturing firms”, Structural Equation Modeling: A Multidisciplinary Journal, Vol. 9, No. 2, 256–282.

Kumar Kar, A. (2014); “A hybrid group decision support system for supplier selection using Analytic Hierarchy Process, Fuzzy set theory and neural network.” Computational Science, 1-38.

Lau, R. S. M., (1999); “Critical factors for achieving manufacturing flexibility”, International Journal of Operations & Production Management, Vol. 19 No. 3, 328-341,

Lemke, F., Goffin, K. & Szwejczewski, M. (2003); “Investigating the meaning of supplier-manufacturer partnerships– Anexploratory study”. International Journal of Physical Distribution and Logistics Management. 33(1), 12-35.

Lung, W.(2007); “An efficient and simple model for multiple criteria supplier selection problem”, European journal ofoperational research,186,1059-1067.

McCutcheon, D. M., Raturi, A. S. & Meredith, J. R. (1994); “The customization-responsiveness squeeze”. Sloan Management Review, winter, 89- 99.

Monczka, R. M., Trent, R. J. & Callahan, T. J. (1993); “Supply base strategies to maximize supplier performance”.International Journal of Physical Distribution & Logistics Management. 23(4), 42-54.

Monczka, R., Giunipero, L. & Reck, R. (1981); “Percieved importance of supplier information”, International Journal  of  Purchasing and Materials Management. 17(1), 21 29.   

Narasimhan, R. & Das, A. (1999); “An empirical investigation of the contribution of strategic sourcing to manufacturing flexibilities and performance”. Decision Sciences. 30(3), 683-718.

Nazari-Shirkouhi, S., Shakouri, H., Javadi, B. and Keramati, A. (2013); “Supplier selection and order allocation problem using a two-phase fuzzy multi-objective linear programming.” Applied Mathematical Modelling., Vol. 37, 9308-9323.

Ndubisi, O. N., Jantan, M., Hing, L. C. & Ayub, M. S. (2005); “Supplier selection and management strategies and manufacturing flexibility”. Enterprise Information Management. 18(3), 330-349.

Olhger, J. (1993); “Manufacturing flexibility and profitability”. International Journal of Production Economics. 30-31, 67-78.

Pearson, J. N. and Ellram, L. M. (1995); “Supplier selection and evaluation in small versus large electronics firms”. Journal of Small Business Management, 33(4), 53-65.

Phusavat, K. & Kanchana, R. (2007); “Competitive priorities of manufacturing firms in Thailand”. Industrial Management and Data Systems, 7(7), 979-996.

Qian, L. (2014); “Market-based supplier selection with price, delivery time, and service level dependent demand.” International Journal of Production Economics., Vol. 147, 697–706.

Rezaei, J., Fahim, P. and Tavasszy, L. (2014); “Supplier selection in the airline retail industry using a funnel methodology: Conjunctive screening method and fuzzy AHP.” Expert Systems with Applications., Vol. 41, 8165-8179.

Rodriguez, F., Osiro, L. and Carpinetti, L.S. (2014); “A comparison between fuzzy AHP and fuzzy TOPSIS methods to supplier selection.” Applied Soft Computing., Vol. 21, 194-209.

Rodriguez, F., Osiro, L. and Carpinetti, L.S. (2014); “A comparison between fuzzy AHP and fuzzy TOPSIS methods to supplier selection.” Applied Soft Computing., Vol. 21, 194-209.

Safa, M., Shahi, A., T.Haas, C. and W.Hipel, k. (2014); “Supplier Selection Process in an integrated construction materials management model.” Automation in Construction., Vol 48, 64-73.

Sangari, M. S,  Razmi, J.,  Zolfaghari, S.(2015); “Developing a practical evaluation framework for identifying critical factors to achieve supply chain agility”,  Measurement 62, 205–214.

Shin, H., Collier, D.A., Wilson, D.D. (2000); “Supply management orientation and supplier/buyer performance”, Journal of Operations Management, Vol. 18, No. 3, 317 333.

Swink, M., Narasimhan, R. & Wang, C. (2007); “Managing beyond the factory walls: Effects of four types of strategic integration on manufacturing plant performance”. Operations Management. 25(1), 148-164.

Thun,J.(2007); “Empirical analysis of manufacturing strategy implementation”, Int. J. Production Economics, in press.

Tracey, M. and Tan, C. L. (2001); "Empirical analysis of supplier selection and involvement". customer satisfaction and firm performance, Supply Chain Management". An International Journal, 6(4), 174-188.

Tracey, M. (2001); “empirial analysis of supplier selection and involvement”. supply chain management: an international journal.

Tranfield, D., Smith, S., Ley, C., Bessant, C. J. & Levy, P. (1991); “Changing organizational design and practices for computer-integrated technologies”. International Journal of Technology Management. 6)3 & 4(, 211-221.

Vonderembse, M. A. & Tracey, M. (1999); “The impact of supplier selection criteria and supplierinvolvement on manufacturing performance”. The Journal of Supply Chain Management, 33-39.

Ward, P.T., McCreery, J. K., Ritzman, L.P., Sharma, D. (1998); “Competitive priorities in operations management”, Decision Sciences, Vol. 29, No. 4, pp. 1035-1046.

Weber, C. A., Current, J. R. & Desai, A. (1998); “Non-cooperative  negotiation strategies for vendor selection”. European Journal of Operational Research 108 (1), 208–223.